"Installed new control, tested unit, all ops good. Job complete."

Inspected unit and determined the hose going from the drain pump to the outer tub was faulty loose therefore a line of water to leak out when receiving water on a cycle. Repaired problem by reconnecting the water hose tightly and securely to the tub. It is now working properly with no more water leaks. Job complete.

Upon arrival found unit working as designed

Found unit full of water and trying drain and spin i found half the volts going to drain pump so i installed new harness and was than able to get drain pump to activate... Once all water was out of unit i than put unit through regular testings and machine worked as it should... Started a clean washer for customer before i left and she is happy

Case number 21063888Found control board was faulty unit would try to start when opening the door... Installed new control board and put unit through testings and confirmed unit working like it should